BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

Description

Looking for a &quot silver bullet&quotprimer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer

As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains

This pioneering primer/sealer permanently blocks most every kind of odor, too

Looking for asilver bulletprimer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it s designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer, Shellac-BasedIntended Application Environment: Interior/ExteriorFinish/Sheen: FlatColor(s): White.

• Paint Sub-Category : Primer, Shellac-Based
• Global Product Type : Building/Construction Paints & Primers
• Intended Application Environment : Interior/Exterior
• Finish/Sheen : Flat
• Color(s) : White
• Color Family : White
• Volume Capacity : 1 gal
• Packaging Type : Bucket/Pail
• Binder/Vehicle Ingredient(s) : Shellac
• Diluent/Solvent Ingredient(s) : Denatured AlcoholWater
• Application Method : BrushRoller
• Recommended Level of Ventilation : Moderate
• Application Temperature Range : 0 and 90F
• Applicable Surface Material : CementConcreteDrywallGlass/CeramicsMasonryMetalPlasterPlasticWood
• Maximum Coverage Area : 500 sq ft
• Cure/Dry-Time Range : 20 min (Touch)45 min (Handle, Re-Coat)1-3 Days (Full Cure)
• Age Recommendation : Ages 16 and Up
• Product Biodegradability Indicator : N
• Product Compostability Indicator : N
• Pre-Consumer Recycled Content Percent : 0%
• Post-Consumer Recycled Content Percent : 0%
• Total Recycled Content Percent : 0%
• Disclaimer Statement : B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90F (-18 and 32C) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
• Footnote 1 : Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
• Footnote 2 : Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils